The 4th generation M2 checks in with big power from a small, sleek chassis. The LV twin power supply helps the M2c to produce 1700 Watts of true RMS power at 12 Volts, over 2400 at 14.4 Volts, and a dynamic power of 3400 Watts. With compact dimensions of less than 7 inches wide and 20 inches long, high powered system design just got a whole lot easier using the new M2c. The M2c uses 0AWG power and ground inputs allowing you to optimize current flow to your amplifier. It also has though bolted RCAs for added durability.
For installation ease, and upgradeability the M2c features Strap and Link mode. When using one of these modes you’re able to use multiple M2c in an install and control the Strapped or Linked amplifiers level settings from the main amp. You’ll also be able to use a single remote gain to control all strapped or linked amps.
The M2c also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
|Test Voltage||12 / 14.4|
|Cont Wattage @ 4ohm||N/A|
|Cont Wattage @ 2ohm||N/A|
|Cont Wattage @ 1ohm||1,700x1@12V / 2,firstname.lastname@example.orgV|
|Max Current Draw - Amperage||250|
|Input Voltage Sensitivity||8 - 0.2|
|Remote Subwoofer Control||Yes|
|Power Wire Guage In||1 x 0|
|Speaker Wire Gauge Out||10|
|Dimensions: in||19.68 x 6.88 x 2.14|
|Dimensions: mm||500 x 175 x 54.5|
|Shipping Weight - lbs||15|
Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.