200 Series

High Performance at Entry Level Prices

Redline-200-top

Keeping overall system economy in mind, we designed the 200 series to have high output on as little as 100-300 Watts. They're hand built with a laminated double-layer poly cotton spider and EROM surround that have been tuned to work well in sealed enclosures as well as compact vented designs.

200 Series Features:

  • Double Stitched EROM Surrounds 
  • High-temp 2.0”, aluminum former voice coil
  • Laminated Spiders
  • Non-pressed paper cones 
  • Cooling vent equipped baskets
  • Back plate coil gap venting
  • Extended pole piece

Specs

Model 210 212
Driver Size - in 10 12
Power Band - Watts 100 - 300 100 - 300
Burst Power - Watts 900 900
VCD - in 2 2
Impedance S4 S4
Piston Dia - in 8.5 10
Fs - Hz 41.05 32.3
Qms 5.627 6.186
Qes 0.734 0.770
Qts 0.649 0.685
Vas - cu ft 0.598 1.499
Xmech - mm 64 64
Xmax - mm 10 10
Cutout Diameter - in 9.125 11.125
Mounting Depth - in 4.688 5.25
Motor Diameter - in 5.5 5.5
Driver Displacement - cu ft 0.05 0.08
Shipping Weight - lbs 11 12
Sealed Enclosure - cu ft 0.4 - 0.8 0.5 - 1.0
Ported Enclosure - cu ft 1.25 - 1.5 1.75 - 2.75

Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product. 

Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.

Express yourself with your choice of logo style and color plus custom dust cap and cone

Start Customizing
Features
feature-10-awg_push_terminals
10-AWG Push Terminals
feature-erom3
Double Stitched EROM Surrounds
feature_paper_cones
Non-pressed paper cones
feature_stamped_basket_redline
Stamped steel basket with cooling vents
dd_features-SFB
SFB
Less -
More +

The cone is our multi-fiber synthetic blend, the type of construction used in the highest power handling concert drivers, not punched out from bleach bottle plastic. These special cones are designed for the highest strength with the lowest weight, again, lighter is louder and faster.

We start with ultra-light weight synthetic fibers which are cut to varying lengths. These fibers are combined and mixed with high binding strength natural fibers and aerospace grade resins. High tensile binding increases the bond strength at the points where the fibers become interlocked.

The fibers are shot at the cone molds in angles which re-enforce the cone body perpendicular to the direction of the voice coil forces. This increases the resistance to bending modes at high power levels.

These high-tech fibers have incredible strength and are further enhanced by using techniques to increase the cone cross section area without adding additional mass. The resin used creates a hard outer skin on the cone surfaces, creating a sandwich construction format. One skin cannot bend without the other skin doing the same, the further these skins are moved apart, the higher the resistance to mutual bending becomes. The ratio of increased strength is exponential, twice the thickness results in 4 times more rigidity. The newest DD synthetic blend cones are state of the art in cone technology and an integral reason why our speakers can supply high SPL and low distortion.

Ready to Buy?