The 700 series is designed for serious performance. Its high-temp 3 inch voice coil can handle enough power to get extremely loud, for extremely long listening sessions. The 700 Series features a cast aluminum frame supporting a triple stack magnet motor, laminated triple layer poly cotton spiders, a higher strength non-pressed cone coupled to a longer excursion EROM surround, making them best suited for duty in vented enclosures.
700 Series Features:
- Double Stitched EROM Surrounds
- High-temp 3.0”, aluminum former voice coil
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped cast aluminum baskets
- Back plate coil gap venting
- Extended pole piece
|Watts RMS||600 - 1200||600 - 1200|
|Impedance||D2 / D4||D2 / D4|
|Piston Dia - in||10||13|
|Fs - Hz||37.68||34.32|
|Vas - liters||20.161||63.571|
|Xmech - mm||80||80|
|Xmax - mm||14||16|
|Frame OD - in||12 5/8||15 7/16|
|Frame OD w/Gasket - in||12 13/16||15 9/16|
|Mounting Diameter - in||11 1/4||13 13/16|
|Mounting Depth - in||7 1/2||8|
|Motor Diameter - in||7 13/16||7 13/16|
|Motor Depth - in||3 1/2||3 1/2|
|Woofer Displacement - cu ft||0.17||0.22|
|Shipping Weight - lbs||38||40|
|Sealed Enclosure - cu ft||N/A||N/A|
|Ported Enclosure - cu ft||1.75 - 2.75||3.0 - 5.0|
Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Push terminals allow for quick sturdy connections to the speaker wire coming from your amplifier. These terminals will accept up to 10-Guage speaker wire for delivering maximum power to the voice coil.