Skip to main content

BSI


Bass Signal Interface

wp-content/uploads/2020/10/BSI-top-2020.png

Search Authorized DD AUDIO Dealers Near You    

The DD Audio BSI (Bass Signal Interface) is designed for audio systems that need a little extra control over the lower frequencies to realize the full potential of a powerful sub stage. With this one piece of equipment you can restore bass that was lost from music during the recording process, enhance bass content that is already present in the recording, and then boost the bass to a level that suits your bassaholic needs. The BSI’s control arsenal employs variable parametric bass processing, 24dB/Oct subsonic and low pass filters, and digital frequency anylisis. These features let you manipulate every aspect of the bass signal so you can add impact to your music with the precision of an audio surgeon. Once the BSI’s acoustic controls are dialed in the multifunction remote control allows for on the fly adjustability of the master volume, effect on/off, and effect level. To make it easy to integrate into almost any aftermarket or factory audio system the BSI is equipped with differential balanced RCA inputs, high level inputs, selectable input voltage range, and auto turn on features.

Features

  • Variable Parametric Bass Processing
  • Variable 24dB/Oct Subsonic and Low Pass Filter
  • Multifunction Remote Control
  • 2ch Differential Balanced RCA & Speaker Level Inputs
  • Selectable Input Voltage Sensitivity Range
  • Signal Sens, 12v, and DC Offset Turn On
  • Variable Gain Adjustment with Output Clip Indicator
  • Selectable Ground Isolation
  • Aluminum Chassis

BSI: Bass Boost and Bass Enhance Active Pre-Amp Signal Processor

Operating Voltage: 10 - 16
Input Channel(s): 2
Output Channel(s): 2
RCA Input Voltage Sensitivity: 0.5 - 5v / 1 - 10v
High-Level Input Voltage Sensitivity: 2 - 20v / 4 - 40v
RCA Output Voltage: > 10v
RCA Input Impedance: ≥ 20k
High Level Input Impedance: 180
RCA Output Impedance: ≥ 50
RCA Input S/N: ≥ 105dBA
High-Level Input S/N: ≥ 106dBA
THD: 0.05%
Frequency Response (Hz): 15Hz-20kHz
Sub-Sonic Filter: 15Hz-50Hz 24dB/Oct
Low-Pass Filter: 50Hz-500Hz 24dB/Oct
Remote Control: Remote Included in Box
Remote Out Current: 12V >500 mA
Dimensions (Inches): 6 x 3.4 x 1
Dimensions (MM): 155 x 87.4 x 27
Price (USD): 149 each

Active signal processors capture the audio signal before it gets to the amplifier allowing you to modify the waveform to meet your needs. They require external power to operate, but provide a higher degree of adjustability than most amplifier preamps or passive (non powered) devices.

Jabee Toyota Prius Loaded Enclosure Being Installed

Support Small Business and Enjoy Expert Installation

We believe in supporting brick and mortar dealers and have carefully partnered with small businesses who can provide quality installation and customer satisfaction befitting DD AUDIO® equipment.

Check with your local dealer for stock and promotional discounts.