Skip to main content

1506b



Efficient, Powerful, Controlled

Photo of 1506b angled top to bottom showing surround, basket, motor and leads.

1506b

Efficient, Powerful, Controlled

The 1506 is Back! Fresh off the assembly line in Oklahoma City, OK, the 1506 is now a “B” revision with major upgrades to the motor: longer USA Made coils, thicker top-plate / deeper gap, and increased magnet assembly. These features result in longer continuous excursion capability, long-term thermal outflow, and enhanced voice coil control for a louder, cleaner, more forceful output.

The previous revision of this Power Tuned Subwoofer was a huge success. The 1506 was a nasty little banger from day one, but the Dual Stage Aluminum Heat Sink and Iron Cloth Spider made it the Apex of 6 Inch subwoofers. The “B” revision is going to stretch every watt and every millimeter of excursion even further, without giving up the control or efficiency that made the 1506 a favorite for compact installs in the first place.

Longer coils enable longer strokes, pushing more air in each cycle for high-impact, low-frequency response. To accommodate the longer voice coil, the top plate was made thicker with a deeper gap, preserving consistent force further into each stroke while improving coil control, especially as the driver is pushed toward the upper end of the subwoofer bandwidth. The thicker top plate also adds thermal mass and surface area to absorb and dissipate heat, while the deeper gap gives more tolerance for thermal expansion without sacrificing that control. Backing it all up is a larger magnet assembly, delivering the added motor force needed to keep those longer coils firmly in check throughout the extended stroke.

A 6 inch is where upgrades like these can matter most. By offsetting the smaller cone area with more throw its compact size makes it perfect for rear-underseat enclosures where multiples can be run to maximize emissive diameter, resulting in a sub (or array of subs) that get as loud, play as hard, and go as long as its bigger USA Made brothers. This is why efficiency is so important for smaller subs: while the 1506b can easily manage 1100 watts RMS, it is capable of running as low as 550 watts RMS, allowing you to run four on a single M2500 (2500w at 1 ohm) with accurate and responsive output.

In true DD fashion we’re always challenging what is already great to make it even better.