Official Demo Stores have an in-store display loaded with DD AUDIO equipment, so you can experience the sound first hand!
If you need to install an aftermarket amp, but pulling the factory headunit isn’t an option the SC4.1 is your solution. The SC4.1 is a premium quality 4 channel speaker level to 6 channel line level signal converter. Channels 1~4 are full range, and channels 5~6 are dedicated sub outputs with a built-in 300Hz 12/dB low pass filter. The inputs feature summing capabilities and can handle up to 25 watts making it compatible with virtually any factory system. You can count on noise free integration via top shelf components such as TI op amps mounted on an FR4 circuit board, and unlike cheaper products it’s active circuitry will not induce stressful loads on your factory system. The RCA outputs are adjustable from 0.05- 4V for precise level matching. To add to this unit’s flexibility, you can choose from auto signal sense or manual 12v remote turn on triggering. All these features fit in a tidy little (4.61″x 3.75″x 1.07″) package aluminum chassis.
Visit our OEM page for upgrade suggestions for your vehicle.
|Input Channel(s):||4 x Speaker Level|
|Output Channel(s):||6 x RCA|
|RCA Input Voltage Sensitivity:||Up to 25 Watts|
|RCA Output Voltage:||0.05-4.0|
|Dimensions (Inches):||3.5 x 4.5 x 1|
|Dimensions (MM):||94 x 116 x 27|
|Shipping Weight (Lbs):||1|
|Price (USD):||119 each|
Active signal processors capture the audio signal before it gets to the amplifier allowing you to modify the waveform to meet your needs. They require external power to operate, but provide a higher degree of adjustability than most amplifier preamps or passive (non powered) devices.
We believe in supporting brick and mortar dealers and have carefully partnered with small businesses who can provide quality installation and customer satisfaction befitting DD AUDIO® equipment.
Check with your local dealer for stock and promotional discounts.