The new M2500a amps get power and operating voltage revisions based on our Z13000 design. The M2500a was designed with the best ultra high current devices, using larger devices but using less of them, allowed us to significantly reduce the size of the amplifiers, all the while designing our highest current capability half bridge M amps ever.

The newest revision to the power supply and output section maximizes the power output from the high efficiency heat sink. These enhancements allow the best power to footprint ratio to date, for any M Series amplifiers, also allowing the amps to run at max 16V, to get the most out of today’s lithium battery capabilities.

We further beefed up internal high current pathways on the PCBs, redesigned high stress sections to use through-hole, higher power components and increased the solder pad area decreasing thermal load on the parts. Many applications for this output power are hidden or confined spaces, so we increased the overall heat sink length for these most demanding thermal applications.

We designed new end panels, further raising the amps off the mounting surface so the internal fan can pull more air through the PCB even on carpeted or padded surfaces.

These high current half bridge amps are more compact, lighter and pack more punch than any previous M Series.

We have an aftermarket app controlled LED vanity plate upgrade available for all M Series models. The vanity plates will be manufactured and shipped from our US factory.